Dromex Chemical Nitrile Glove
- Green Nitrile unsupported 15 mil (0.38mm) thick
- Micro flock lined for comfort
- 33cm length
- Washable
- Resistance to K: Sodium Hydroxide 40% L: Sulphuric Acid 96% J: n-Heptane
Showing 193–204 of 508 resultsSorted by latest
-
-
Dromex CUT5 Chemical Glove Plus
- High Abrasion Resistance
- High Chemical Resistance
- High Heat Resistance
- High Cut Resistance
- Colour UV Resistance
- Lint Free & Washable
-
Dromex 57H201B CUT5 Chemical Glove
- High Abrasion Resistance
- High Chemical Resistance
- High Heat Resistance
- High Cut Resistance
- Colour UV Resistance
- Lint Free & Washable
-
Dromex Poly Viscose Acid Conti Suit Reflective
- 80/20 Poly Viscose, 270gsm fabric
- YKK Concealed brass zip on jackets & pants
- Full triple needle topstitched garment
- Mitred left breast pocket & jacket pockets
- Side entry pants pockets & rear right pocket
- 50mm Lime/silver/lime reflective webbing tape on arms, chest, legs & an “X” on the back
- A coated acid resistant fabric that prevents wetting by acids or moisture
- Protection in the event of accidental chemical spillage
Protection from the following chemicals:HCI, H2SO4, N9OH, Caustic Soda
SIZES
- 30-64
-
Dromex Acid Resistant Conti Suit
- 80/20 Poly Cotton, 200gsm fabric
- YKK concealed metal zip on jackets and pants
- Triple topstitched shoulders, armholes, in-leg & back rise
- Left breast pocket with pen division & V-flap
- Side entry pants pockets & rear right pocket
- A coated acid resistant fabric that doesn’t allow wetting by acids or moisture
- Protection in the event of accidental chemical spillage
- Sold as a set
Protection from the following chemicals:HNO3, HCI, H2SO4 & NaOH
SIZES
- 30-60
-
Dromex Promax Disposable Coverall
- Type 5 and Type 6 Disposable Coverall
- Elasticated wrists legs and waist
- Hooded with a concealed HDPE (high density polyethylene) zipper front
SIZES
Small to 3XLarge
-
Dromex Full Face Mask
- Polycarbonate anti-fog and impact resistant visor
- Peripheral optical vision of 220°
- TPR (Thermo Plastic Rubber) 5-point adjustable head harness
- Large face seal flange
- High efficiency exhalation valve
- Separate mask body
- Standard Dromex unifit filters
- Withstands a pull of 15kg
- One size fits all
- Designed to withstand temperatures of up to 70 ± 3°
-
Dromex Promax 1000 Disposable Coverall
- A breathable microporous polyethylene with spunbond polypropylene, composition that has excellent physical properties (strength, elasticity, tear etc)
- Enhanced waterproof performance, providing impervious protection suitable for use against biological hazards such as blood
- All seams are taped for additional strength and protection especially against dangerous airborne particles and liquid
-
Dromex Promax C4000 Disposable Coverall
- Type 3, 4, 5 and 6 disposable coverall
- Ultrasonic welded and taped seams preventing permeation, dust and liquid ingress
- Double zip and storm flap for secure front protection
- Double elasticated cuff with thumb loop
- Double layer cushioned knee pads for comfort and durability
- Protects the arms, legs, torso and head from the hazards of light liquid sprays, chemical splashes and sprays, airborne solid particulates, radioactive contamination, antistatic dissipation and infective agents contact
- Resistance to penetration by blood/fluids, wet bacterial penetration, biologically contaminated aerosols & powders
- Permeation prevention against a basic range of chemicals: Sulphuric Acid 96% – Class 3, Sodium Hydroxide 10% – Class 3, o-Xylene – Class 3, 1-Butanol – Class 3
-
Dromex ARC Blanket
- Dromex A.P.T Fabric – 88% Cotton, 12% FR Nylon
- Two-layer panel system > 14 oz Layer 1 > 14 oz Layer 2
- Inherent FR thread throughout
- Heat transfer print & FR APTV 55cal embroidery
- Ten double-layer loops for securing in place
- Centralised cable strap with Velcro/zip strap
- Provides protection against arc blast hazards during
- electrical work in confined spaces
SIZING:
- 1.5m x 2.4m
- XLarge: 2.5m x 4m
-
Dromex ERGOS2 ARC Visor
- Increased worker safety because of REAL VIEW of work environment.
- A3:A31New generation of face protection against the thermal hazards and impact of an arc flash
- A3:A31Tested to EN 166 for protection against molten metals & hot solids
- A3:A31Realistic colour reproduction >95%
- A3:A31Protection against high-speed particles: medium energy impact (B)
- A3:A31Extended length visor & transprent chin guard
- A3:A31Optimised weight balance & no time limit on durability
- A3:A31Fitted with a universal bracket for use with front brim arc rated hard hats according to EN 50365 or EN 397 standards
- 26 cal/cm2
-
Dromex 16.8 CAL ARC Dipped Gloves
- Excellent grip in wet, oily & dry environments
- High dexterity resistance
- High resistance to snatch, tear, cut, abrasion & heat
- Basic chemical oil stability
- Seamless knitted aramid fibre glove with a textured coated palm
- Extended 10cm cuff
SIZING:7 – 13